|
GB
UNICUT® 1
A
very low viscosity, high lubricity cutting oil, designed
for applications requiring a good flushing action, along
with good wettability and heat removal properties. It
is water-white, does not stain yellow metals and is suitable
for machining cast iron and non-ferrous metals, such as
aluminium.
Technical
Data Sheet
GB
UNICUT® 2
A
medium viscosity, high lubricity neat cutting oil, free
from chlorine, sulphur or phosphorus. Ideal for machining
both medium tensile steels and yellow metals, such as
copper or brass.
Technical
Data Sheet
GB
UNICUT® 3
A
medium viscosity, extreme-pressure cutting oil, ideally
suited for automated operations involving both medium
tensile steels and yellow metals.
Technical
Data Sheet
GB
UNICUT® 4
A
high performance, extreme-pressure cutting oil containing
active sulphur, for use in severe operations including
heavy duty turning and gear hobbing.
Technical
Data Sheet
|
|
GB
UNICUT® 5
A
low viscosity, extreme-pressure cutting oil containing
active sulphur, ideal for a wide variety of arduous cutting
operations involving high alloy and stainless steels.
Technical
Data Sheet
GB
UNICUT® 6
A
medium viscosity, heavy-duty cutting oil, formulated with
active sulphur and chlorinated extreme-pressure additives,
for use in severe cutting operations on steel, such as
heavy duty turning and gear hobbing.
Technical
Data Sheet
GB
UNICUT® 7
A
medium viscosity, high lubricity, extreme-pressure cutting
oil, incorporating an inactive sulphurised ester. Ideally
suited to operations on cuprous and aluminium alloys.
Technical
Data Sheet
GB
UNICUT® 8
A
medium viscosity, high lubricity, chlorinated extreme-pressure
cutting oil, formulated for broaching, tapping and threading
operations on alloy, high tensile and stainless steels.
Technical
Data Sheet
|
